The Apollo Waterproof Manual Call Point has a highly visible alarm indicator which can be seen from up to 10 metres away. The manual call point interrupts the polling cycle for a fast response, when activated. A combined LED indicator and front reset mechanism allows for a simple reset.
- IP67 rated
- EN54-11 approved (EN54-17 approved for Isolator version)
- E-Z fit connectors
- Front facing addressing without the need to detach the backbox
- A unique, ergonomically designed key for resetting and front cover removal
- Resettable element
- Easy access, front reset mechanism
- Captive screws for easy installation
- Flashing LED Option
Supply Voltage: 17 - 28V DC
Dimensions (HxWxD): 114mm x 114mm x 74mm
Digital Communication Protocol: Discovery 5 - 9V Peak to Peak
Power Up Surge (1s typical): 1mA
Alarm current (LED On): 4mA
Operating temperature: -30°C to 70°C
Humidity: 0% to 95%RH (no condensation or icing)
Vibration, impact and shock: EN 54-11 & EN 54-17(Red version only)
IP Rating: 67
Approvals & standards: Complies with EMC Directive 2004/108/EC Red version complies with EN54–11:2001 EN54-17:2005 (Isolated version)
The address of each Manual Call Point is set at the commissioning stage by means of a seven-segment DIL switch. A red alarm LED is provided on the Manual Call Point. This LED is controlled independently of the Manual Call Point, by the fire control panel.
Once activated, the Manual Call Point can be reset by inserting the reset key into the front facing LED, turning clockwise until a positive click and reset occurs. The isolated version of the Manual Call Point incorporates a short circuit isolator which will ensure its operation in the event of a short circuit fault on the loop. Isolator operation is indicated by a yellow LED.