top of page
Edwards EST SIGA-CC2 Dual Output Signal Module

Edwards EST SIGA-CC2 Dual Output Signal Module



SIGA-CC1/MCC1 Single Input Signal Modules and SIGA-CC2/ MCC2 Dual Input Signal Modules are part of EST's Signature Series system. They are intelligent analogue addressable devices used for connecting, upon command from the loop controller, supervised Class B signal or telephone circuits to their respective power inputs. The power inputs may be polarized 24 Vdc to operate audible and visible signal appliances or 25 and 70 VRMS to operate audio evacuation speakers and firefighter’s telephones.


The actual operation of the SIGA-CC1/MCC1 and SIGA-CC2/ MCC2 is determined by the “personality code” selected by the installer. It is downloaded to the module from the Signature loop controller during system configuration.


The SIGA-CC1 and SIGA-CC2 mount to standard North Ameri- can two-gang electrical boxes, making them ideal for locations where only one module is required. Separate I/O and data loop connections are made to each module.


The SIGA-MCC1 and SIGA-MCC2 are part of the UIO family of plug-in Signature Series modules. They function identically to the SIGA-CC1 and SIGA-CC2 but take advantage of the modular flexibility and easy installation that characterize all UIO modules. Two- and six-module UIO motherboards are available. These can accommodate individual risers for each onboard module or risers that are shared by any combination of its UIO modules. All wiring connections are made to terminal blocks on the motherboard. UIO assemblies may be mounted in Edwards enclosures.


Standard Features


  • Single and Dual input (riser) select


Use for connecting supervised 24 Vdc Audible/Visible signal circuits, or 25 and 70 VRMS Audio Evacuation and Telephone circuits to their power inputs.


  • Ring-tone generator


When configured for telephone circuits, the SIGA-CC1 generates its own ring-tone signal eliminating the need for a separate ring-tone circuit.


  • Plug-in (UIO) or standard 2-gang mount


UIO versions allow quick installation where multiple modules are required. The 2-gang mount version is ideal for remote locations that require a single module.


  • Automatic device mapping


Signature modules transmit information to the loop controller regarding their circuit locations with respect to other Signature devices on the wire loop.


  • Electronic addressing


Programmable addresses are downloaded from the loop controller, a PC, or the SIGA-PRO Signature Program/Service Tool; there are no switches or dials to set.


  • An intelligent device with a microprocessor


All decisions are made at the module to allow lower communication speed with substantially improved control panel response time and less sensitivity to line noise and loop wiring properties; twisted or shielded wire is not required.


  • Ground fault detection by address


Detects ground faults right down to the device level.

12 months warranty

bottom of page